Underdesk Notebook Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Under Desk or cabinet in my case notebook storage
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed a place where my notebook was easy access but didnt take up much space in my storage cabinet So thus 3-d printing to the rescue AGAIN.
This will fit a 7.5" wide notebook
Included .3mf file if you want the whole plate
otherwise print one notbookmainbody.stl and 4 notebookbracket.stl
The brackets I made with very tight tolerance and will pressure fit into the slots on the notbookmainbody. Was thinking I was going to use super glue to connect brackets to main body but so far haven't needed to.
Print orientation as shown in the screenshot of slicer. No support necessary
.20 layer height
3 walls
25%infill