1 / 2
Collet racks for inch and metric ER32 collets and Chucks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tray for holding ER32 collets, hex and square chucks and extra nuts.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Designed in Rhino3d, printed on a Bambu X1C on the new supertack plate. printed in PETG-HF with 10% infill and 3 walls.
Inch tray took aprox. 7.5 hrs and 3.5 hrs for the lid
Metric tray took 6.5 hrs and 3.7 hrs for the lid (a little higher to clear the blocks)
