WWG2 EBB36 PUG mount for 21mm standoffs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made the third point attachment leg longer by 1.4mm to be used with 21mm standoffs from the EB36 kit.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
EB36 board comes with 21mm long brass standoffs. Using them results in the third point attachment leg not reaching the WWG2's body by 1.4mm. This remix simply adds 1.4mm to the length of that leg, so that you could use the 21mm standoffs that came with the EB36 board.
Note that there is also this remix which makes it longer by 2mm:
https://www.printables.com/model/1211028-wwg2-nh36ebb36-pug-mount-2mm
For me 2mm was too long, so I'm publishing this “+1.4mm” version.
You need the other parts (the clamp and the spacers) from the original design.