Elfo Low Poly Bead Disenchantment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elfo's head as a bead for a 4 mm drawstring
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With these beads, you'll always have your little elf companion with you.
The parts are printed individually so that it is also suitable for a single-color printer, except the eyes. However, the pupils can simply be added with a thin sharpie.
Glue is not needed.
The bead is intended for a drawstring with a 4 mm diameter of the plastic piece. If you have a different size, you can scale it accordingly.
The parts should be printed with supports.
I recommend keeping the orientation of the head as it is, as this eliminates the supports for the hair.
If you also want to have a demonic companion with you, take a look at my model for Luci :) https://www.printables.com/model/1247414-luci-low-poly-bead-disenchantment
Update:
I have colored the hair green (as it should be). This has eliminated a part and the bead can also be printed smaller. The stl's for this are named smal.