Snap REPO Robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my Snap REPO Robot design. All parts snap together firmly and can rotate freely.
- Ocena
- 4,75 / 5
- Polubienia
- 71
- Pobrania
- 715
- Wydruki
- 4
- Wyświetlenia
- 4282
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my Snap-fit REPO robot model. It is 100% printed… kind of. The joints for the arms, legs and head are made of small filament pieces which are melted on the ends to make a sort of lock pin.
(Check out the picture above)
For the eyes, just set a pause at the layer height you want and change filament to get your desired pupil size.
Print in the orientation shown in the screenshot above.
All the parts are designed to be as easy to print as possible.
I dont need any supports on my Sovol Sv08, but if your printer struggles with bridges and overhangs, it wont hurt to enable them.
Have fun!
Update!
Got some feedback about the holes for the filament beeing too small, so i have now added some folders with the affected parts with different amounts of extra clearance. Hope this solves the problem!
Thanks for the feedback and I love seeing your makes!