1 / 2
Flat prusabox
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Implementation of a box made of an old paper core from a spool of Prusament, a slim one.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Implementation of a box made of an old paper core from a spool of Prusament. This variant makes it just a couple of millimeters higher that the core itself.
- The top and bottom part are modeled after prusament flanges, therefore have a very strong grip. The downside of it that it makes box significantly hard to assemble. A tool will be needed (vice, clamp etc).
- For an easy assemble (and ability to disassemble afterwards), take top and bottom from https://www.printables.com/model/548294-prusabox-recycle-your-cardboard-from-prusament-spo, the original model. Threads in top and lid are measured from there, therefore compatible.
- The top part has an option with a funnel, if you want to store some small items (M2×6 screws maybe) and are afraid of spilling them.
- Double-check the orientation of the core before assembling, otherwise your hungry Jo might appear upside-down.
- As you can see in the
source/folder, technically the model is recreated from scratch in openscad. However, the idea and most of measurements come from the original model.