1 / 2
REUSABLE MOLD FOR PEN TURNING BLANKS (120*20*24mm) — zdjęcie 1
1 / 2

REUSABLE MOLD FOR PEN TURNING BLANKS (120*20*24mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mold for creating Pen blanks with Epoxy. Best use with Flexible filament (TPU).

Ocena
0 / 5
Polubienia
17
Pobrania
120
Wydruki
0
Wyświetlenia
661
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Since i have a new lathe i try to create also pens. I found this https://cults3d.com/en/3d-model/various/reusable-mold-for-pen-turning-blanks-makerneer model online. 

This is  a good model, but it was too big for me so i designed a smaller version.

I did not changed the original one, but created a total new one.

 

A good helping page is the blog page from the user where i got the original idea from:

https://www.instructables.com/id/Simple-Reusable-3D-Printed-Mold/

 

What i changed in my model is that i added at both ends some pins that will mark the middle and can directly used at the lathe (it is not total in the middle, because the mold wont be totally filled.

Tagi