Weaving Bobbin Ends for Acrylic Tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make your own Weaving Bobbins with a 3/8" OD acrylic tube and these printed ends
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These ends are used to make a weaving bobbin with a hollow acrylic tube that is 3/8" outer diameter (inner diameter doesn't matter as much but we used ¼" inner diameter)l. You can make them as long as you want. Most bobbins are 4" long. But longer shuttles can take 6" bobbins. We've even done 2" bobbins so that we could have two strands of yarn in a standard sized shuttle (vs the longer dual bobbin shuttles). You could pop the ends off to make storage more compact, however, we're lazy and they aren't that large so we just keep the ends on.
To make a bobbin, you need to print two ends and they will friction fit to the acrylic tube. We print successfully without support