1 / 4
Settlers of Catan Player Piece Case - Including expansions — zdjęcie 1
1 / 4

Settlers of Catan Player Piece Case - Including expansions

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case to store Settlers of Catan player pieces including expansion pieces

Ocena
0 / 5
Polubienia
32
Pobrania
114
Wydruki
0
Wyświetlenia
2393
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Case to hold all the player pieces for a 3d printed Settlers of Catan base game set. ( I also have a smaller version for player pieces without the expansions) 
https://www.prusaprinters.org/prints/124952-settlers-of-catan-player-piece-case

Player pieces in the case are from Dakanzla's 3d models. 
https://www.thingiverse.com/thing:2525047

Printed using 0.2mm layers. 
Only place support is needed is for the bottoms of the hinge on the outside piece. 
The bottom of the lid has cutouts where the roads & metropolis's stick up to hold them in place when the case is closed and so that the case could be thinner. 
Bottom of the lid also has a lip to sit cards on as a card holder. 

Needed is 2x 50mm x 2mm Brad nails to go in the hinge. (I also put a drop of super glue on the head of the nail when I put it in to ensure it doesn't come out.  

Tagi