1 / 6
fischertechnik compatible case for China LED Spot / fischertechnik LED Spot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 30x30mm case for China LED spots, with grooves for the fischertechnik construction toy system.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small case for China LED spots, aimed to integrate those spots into fischertechnik models.
The spots are widely available, at AliExpress for example.
Basic data of the spot:
- 1W Power, 5V
- Height 35mm approx.
- Base diameter 29,5mm approx.
- Spot diameter 19,5mm approx.
- often sold together with distributor to connect several LEDs, and a dimmer switch.
The spot is fixed with two screws M2.5x12 countersunk.
There are two variants of the case, only difference is the position of the screw holes because the wire position differs from spot to spot, so you can choose the variant that suits your spot.
Printed in PLA, adaptive layer height (base 0.2mm)