Fisher Price Cash Register Replacement Part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement mechanical part for a Fisher price Toy cash register.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
A replacement for the actuating arm that rings the bell and opens the tray for these classic toy cash registers.
Needs to be printed laying flat, with support. Ideally you use some tricks like support material with big interface, or painters tape on the support interface with a pause.
The supported flat part needs to be sanded to avoid friction perhaps, and/or use some grease or graphite powder on it. I had some trouble getting it to move when the whole thing was assembled, before I sanded and lubed it.
The pin for the spring is hollow, just insert some filament, and melt it into the top and bottom with a soldering iron.