MMU2 / MMU2S / MMU3 Bypass with Bowden Couplers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy Bypass of the MMU when using e.g flexible filaments
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
My take on a filament bypass. It uses two M10 (10mm diameter) Bowden Couplers (like these or see last picture) and borrows the mounting from the MMU3 so it looks nice and tidy when next to each other (my pictures show a MMU2S, hence the differences in the mounting, I'm planning to upgrade soon)
The bowden tube length does not need to be altered when using the bypass, it is lower but a little more to the side, so it evens out nicely.
I printed mine in ABS and the threads grip pretty tight. If it's too tight on your printer, experiment with your expansion settings in the slicer or adjust the offsets in the Fusion360 file (in the timeline right next to the thread)
Parts needed
- 2 bowden couplers
- 2 M3 countersunk screws (8-20mm length)
Print Settings:
- print two mounts laying flat on the sides
(3mf-file should be oriented already correctly) - print the main body standing on it's face, so that the threads print nicely
(3mf-file should be oriented already correctly) - layer height not more than 0.2mm, lower height creates better threads
- 4 perimeters/walls for enough strength
- infill: 40% or more
- no supports needed
Assembly:
- screw the two bowden couplers in, you may need to use a 13mm wrench.
- fix the body to the two mounts using M3 countersunk screws.
- clip the bypass to your printers frame