Dewalt Battery Holder with Various Configurations
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dewalt Battery Holder with or without locking feature as well as metric or imperial screws.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my version of a DeWalt battery holder, made a relatively simple design with various configurations to meet different needs. Did these a while back as a gift for friends and family, made some updates to them and decided to share them. :)
Comes in a few different configurations.
- Dewalt Battery Holder_Metric_M4_Locking
- Dewalt Battery Holder_Imperial_#8_Locking
- Dewalt Battery Holder_Metric_M4_Non Locking
- Dewalt Battery Holder_Imperial_#8_-Non-Locking
Locking Version
Non-Locking Version
Mounting Holes for Imperial are 1" apart
Mounting Holes for Metric are 25mm apart
Recommended Print orientation
Notes:
- Print with supports.
- For Imperial hardware use at least a #8 x ½" or longer if fastening to wood.
- For Metric hardware use at least M4 x 12mm screw or longer if fastening to wood.
- If you print part in vertical orientation you may not need supports, but you will risk splitting the part if you over tighten the screws which is why I recommend printing the part in the flat.
Other:
If there are other variations you would like to see let me know! I am currently making some updates to one that I designed for the IKEA Skadis Pegboard.