Ender 3 V3 Plus Tool Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find any practical tool tray/holder to put everything that comes with the Ender3V3Plus, so I made one.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 235
- Wydruki
- 1
- Wyświetlenia
- 807
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This tool tray attaches to the front right rubber foot, so that you can align it to the side or turn it as needed. Everything was custom fit to purpose, and since I like to have my hex keys in a fixed position I made a version to print the hex key cradle separately so I could print just that part with a 0.2mm nozzle (0.1mm layer). I'm uploading the all-in-one version too, feel free to print it with a 0.4mm nozzle (0.2mm layer) playing with the hole X-Y tolerance until it's as loose or tight as you want. Anything at or above 15% infill should be fine. I've added an alternate version that sits closer to the printer. If you feel like using it on the other side just mirror it on the X axis on your slicer.
This might work for a 3V3 as well?? let me know…
P.S.: I used a couple pieces of different PLA colors I had for a test print but ended up keeping it, I like the way it looks having that contrast.