1 / 2
02-06 Honda CR-V Wiper Arm Slider (76723-S9A-003) — zdjęcie 1
1 / 2

02-06 Honda CR-V Wiper Arm Slider (76723-S9A-003)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement Wiper Arm Slider for the 2002-2006 Honda CR-V rear wiper

Ocena
0 / 5
Polubienia
4
Pobrania
16
Wydruki
0
Wyświetlenia
265
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is the plastic slider piece for the rear window wiper on the 02-06 CR-V, this is the part that lifts the wipe over the gap between the body panel and the rear window when you turn the wiper on and off. This is a wear item and I recommend printing it in a UV resistant material like ASA/ABS/PETG. The original part looks like it was likely glass filled nylon. Honda used to sell this as an individual replacement part, it has been discontinued, but I believe still comes as part of the replacement wiper arm (76720-S9A-A01).

If you import the part directly into a slicer the curved dimple part will be on the bed, flip the part so the opposite end it on the bed standing upright, print with auto tree supports, touching the bed only.

I think infill is less important than wall count as this part isn't structural, but will see heavy wear. I went with a 0.12mm layer height thinking it might help reduce the wear it caused against the wiper stop.

Tagi