Cooler Master Elite 130 2x 3.5" HDD Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These enable you to mount two 3.5" drives in the bottom single 3.5" mounting location.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
These allow you to mount two 3.5" hard drives in the original location for a single 3.5" drive. 4 6-32 x 0.15" heat-set inserts are required, installed from the bottom. These will accept the original Cooler Master shoulder screws and grommets allowing tew mounts to slide right into the original location.
I originally had the second drive in the 5.25" bay but it wasn't getting any airflow from the intake fan so I made these to move it down. This also keeps the 5.25" bay accessible. Parts were printed in ABS.
Inventor .ipt and STEP files are included so you can modify them if need be.