Roborock S7 Pro Water Tank Dummy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement dummy to cover the water tank slot
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement tank designed for the Roborock S7 Pro Ultra.
It somehow always activates the wet mob functionality on new cleaning run, since I found no way to turn off this behavior except removing the tank, I used the robot without water tank. However, this does not look that pretty so here is a dummy tank that can be locked in place instead of the original tank.
It features a small edge that will lock it in place with the spring support inside the robot, so just stick it into the robot and that's it.
The design features all those bevels from the original model and was optimized to be printerfriendly.