The Pea - 1:10 scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully 3D printable, 1:10 scale, Pea mobile (Roughly 15 x 11 cm)
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 188
- Wydruki
- 2
- Wyświetlenia
- 819
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY!
The Pea is a 1:10 scale display model inspired by older micro-cars.
SIZE / WEIGHT:
Total assembly: Roughly 15 x 11 cm
Filament: We used roughly 150 g of filament using 5% infill.
MAKEABLE FOR EVERYONE:
Largest single part: 105 x 136 x 105 mm
Easy assembly!
FEATURES:
Rolling wheels
Openable door
RECOMMENDED SETTINGS:
Resolution: 0.2 mm layerheight
Infill: 5%, or lightning infill
Supports: Yes, we recommend using organic supports!
Brim: Advised against warping, not mandatory!
ASSEMBLY:
Parts like the spoiler, seat and steeringwheel can be glued to the body
The wheels can be glued to the axles and snap into place
The door can be attached using a piece of filament!
NOTES:
Fitment: Fit check any parts before permanently attaching them! Some parts may need sanding or filing!
SUPPORT:
Incase of any problems or questions please contact us via a private message on here, or over on Instagram or via email: [email protected]
Feel free to share your makes with us on here, or over on Instagram and tag us using @stllabs
(This model is made by STL Labs and may not be sold or shared by unauthorized third parties)