PortaLens cleaning gimbal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Contact lenses gimbal based travel protector case to clean your night lenses on the go without spilling cleaner fluid
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My son uses special lenses that he wears only at night while sleeping. They gently reshape his eyes so he can see clearly during the day without glasses—pretty cool stuff.
The lenses need about six hours of cleaning during the day, and when we’re traveling by car, train, or whatever, it gets a bit tricky to carry the cleaning case without spilling the solution. The case also needs a small vent to regulate pressure, which makes it even more prone to leaks.
PortaLens is designed to solve that problem by keeping the cleaning case upright at all times while on the move, reducing the risk of spills.
The 3D-Model consist of 4 parts. I would recommend to print the bottom case and the two gimbal frames with PETG/PLA and the top case with TPU ( use the more stiff one if you have). This enables a nice fit of the top case to the bottom case.
You need:
4x 7mm ball bearings,
4x M3 10mm screws
4x M3 heated inserts
How to set up:
Place the ball bearings into the enclosed pockets of the outer gimbal frame and the bottom case. Then, solder the heated inserts into both gimbal frames, making sure the edge of each insert is flush with the outer surface of the frame.
Use four M3 screws inserted from inside the two gimbal frames as axles for the ball bearings. The screws should follow the curve of the frame and remain flush—they shouldn’t stick out.
