Clip-on Sunglasses Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I took inspiration from the model by aagam2 to make my clip-on sunglasses case.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 468
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is custom-fitted to my specific sunglasses clip. The model has been made in FreeCAD and the project is available in the files, so it is possible to change it to fit other types of glasses, but I don't guarantee that is going to be super trivial XD.
Also the step file is included for other editors, if needed.
The tolerances are big, as it was printed on my old AM8 (you can see that from the print quality :D). But if you want to try it, I have included a hinge test.
The model has holes for three magnets, but after printing I have found out that one 6x2mm was plenty to keep it closed.
The case is printed in PLA, but I have added a TPU internal support so it doesn't rattle around. Also this is custom for my glasses of course.
It's also on GitHub!
https://github.com/dennisloi/3D-models/tree/master/Clip-on%20Sunglasses%20Case