1 / 3
Box for prntmkr's Wiper Guards
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A storage box to keep your wiper guards and to remind you to take them off, so they don't fly away on the highway.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a storage box that fix perfectly a set of four wiper guards by prntmkr. I recommend printing in bright colour and setting on the dash in front of the speedometer as a reminder to take them off before departing, as I had a set fly away on the highway.
Print instructions:
- Printable in PETG or FLEX - bright colour recommended;
- As the case relies on friction, depending on your printer tolerances, your mileage will vary. You might need to scale the lid up or down.
- Adaptive Cubic infill 15%;
- 0.2 speed preset on the Mini+ IS.
Happy printing! If you print, please post a make.