Flik Wing DJI O4 lite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
**I haven't tested this in flight for cooling yet. Works on bench with utility fan blowing across the fuselage at 700mw @ 72F ambient temp.
**Requires the extended camera cable.
I installed the o4 lite to the bridge mount with uxcell- 2mm ID ceramic insulated tubes 4mm OD x 5mm tall found on Amazon to help insulate the mount from the heat of the o4.
The mount should be placed just behind the duct extension under the hatch about 67mm from the front of the hatch opening. Use the shim block to hold up the bridge mount, install the hatch with the duct extension in place and look through the camera hole for exact placement of the mount.
Use the shim block to hold the bridge mount in place while the glue dries.
The shim block has three sides - 27.25mm, 27.75mm 28.25mm