Mercury Nebula Box Turtle mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box Turtle mounts for the Mercury Nebula 370
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 859
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I was asked by another box turtle community member to design some mounts for their Mercury 370 Nebula.
There are 4 versions. Hex pattern and plain. Two different printer extrusions sizes are provided, standard 6mm extrusions on the printer side, and 5mm extrusions on the printer side.
BOM:
4xM3x Rollnuts or Hammerheads
2x M3x16
2xM3x8
per leg
Print settings:
- Layer Height: 0.2mm
- Extrusion Width: 0.4mm, forced
- Infill:
- Percentage: 20%
- Type: Grid, Gyroid, Honeycomb, Triangle, or Cubic
- Walls: 4
- Top/Bottom layers: 5
Multi Color:
These files can be uploaded in your slicer, Orca for example. Load the .step file and simply paint Objects 1 and 2 in your accent color and object 3 in your primary color. example:
IMPORTANT!
To print these properly without supports you'll need to make sure you have “Extra perimeters on overhangs” deselected
example:
Special thanks: Goldy for testing the model