1 / 11
3D Mouse / Finger Joystick Version 2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I want a simple and easy 3D mouse.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 1992
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (1)Kolekcje (68)Powiązane
Don't forget to like and comment.
The idea is simple: I want a simple and easy 3D mouse.
Despite owning a 3D Connexion Mouse Explorer, I find myself still using my mouse for the translations. So I could use some kind of left hand device to handle the rotations.
Bonus: it can also be used as a joystick!
Print:
- Printed in PLA without support.
- Should work as well with resin.
Materials:
- Joystick module 5-pin KY 23 PS2 with the circuit board (Arduino UNO starter kit for instance).
- 4x mini press buttons (6x6x4.3 momentary button).
- 1 rotary encoder (5-pin Module EC11). Also works with a potentiometer.
- Optional: 11x 6mm ball bearing (airsoft?)
- 6x M3 bolt + nut.
- Arduino Pro Micro.
- rubber pad.
Assembly:
- Check the pictures, they are worth 1000 words.
- I shortened the rotary bit of the encoder by 8mm.
- I put a small piece of paper between the Arduino and the joystick module for electrical insulation.
Known Issues and Planned Solutions:
- Improvement idea: replace the 4 buttons on the base by 2 strain gauges.
- Software: it's declared like a joystick using Arduino IDE and this library. You may want to check MMJoy2 first.