1 / 1
Ender 3 NG V1.2 - TZ V6 2.0 mount /w v6 nozzle variation
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified mounting solution for tz v6 2.0 (without collar)
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 893
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (44)Powiązane
This is a modified mount to use the TZ V6 2.0 on the e3ng v1.2 with the stock base and stock S sized ducts, there is a V6 nozzle version because technically it does fit but makes the hotend 1.5mm longer. if any issues are there, please let me know so i can fix them!
21/4/2025: Added mount for tz with meltzone extender and v6 nozzle, compatible with M duct. (wont know how well the hotend will work in this configuration, will be tested)