Case for LogicAnalyzer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the fabulous LogicAnalyzer (v6) from gusmanb.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 405
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
This is a case for the fabulous LogicAnalyzer (v6) from gusmanb. Check it out at at github:
https://github.com/gusmanb/logicanalyzer
I've orderd the PCBs from PCBWay and everything worked out nicely! Thanks PCBWay!
I've drilled the holes in my PCBs a bit wider with a 3mm drill, to fit the 3mm screws.
You need 4 heat inserts (the heat inserts for vorons should fit M3x5x4, or the ones with only 3mm height) and 4 M3x14 cap head screws.
It should also be possible to use 2.5mm screws and the heat inserts fitting those screws, but i've not tested it. M3 is far more common in my workshop :-)