1 / 4
Cage for queen bee   -   Käfig für Bienenkönigin — zdjęcie 1
1 / 4

Cage for queen bee - Käfig für Bienenkönigin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cage for queen bees to fight the varroa mite. Käfig für Bienenkönigin um die Varomilbe zu bekämpfen.

Ocena
5 / 5
Polubienia
34
Pobrania
252
Wydruki
1
Wyświetlenia
1128
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

 

This is a cage for the queen bee to combat the varroa mite. She then no longer lays eggs in the combs. As the mite only reproduces in the bee brood, a break in breeding also stops the development of the mite population. After three weeks, the bees are brood-free and can be treated more easily with lactic or oxalic acid.

You can find instructions here:

https://www.bienenundnatur.de/bienenkrankheiten/varroabehandlung/koenigin-kaefigen-brutstopp-gegen-varroa-618

The page is in German - please use a translator to translate the page.

Please print without support structure - PLA works best.

This printing works best with a well-calibrated printer.
 Tested on an MK3 and a P1S. A piece of filament is required as a hinge for the door.

20 April 2025: I have added a smaller version of the cage.

#################

Dies ist ein Käfig für die Bienenkönigin, um die Varroamilbe zu bekämpfen. Sie legt dann keine Eier mehr in die Waben. Da sich die Milbe nur in der Bienenbrut vermehrt, stoppt eine Brutpause der Bienen auch die Entwicklung der Milbenpopulation. Nach drei Wochen sind die Bienen brutfrei und können leichter mit Milch- oder Oxalsäure behandelt werden.

Eine Anleitung dazu finden Sie hier:

https://www.bienenundnatur.de/bienenkrankheiten/varroabehandlung/koenigin-kaefigen-brutstopp-gegen-varroa-618

Bitte ohne Stützstruktur drucken - PLA funktioniert am besten.

Dieser Ausdruck funktioniert am besten mit einem gut kalibrierten Drucker. Getestet auf einem MK3 und einem P1S. Für das Türscharnier wird ein Stück Filament benötigt.

20. April 2025: Ich habe eine kleinere Version des Käfigs hinzugefügt.

 

Tagi