Pegboard Hook + Peg Mounting Plates for 1" pegboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6 x 2 and 6 x 1 pegboard plates for imperial (1 inch on center) pegboard.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A lot of pegboard organizers available online are made for metric spaced pegboard.
I'm in the US and only have access to imperial (1 inch on center) pegboard, so I made some plates with perfect 1" peg spacing that can be easily imported into your favorite CAD software and added to any metric pegboard accessory that you'd like to print.
Two versions are available - 1" x 6 pegs and 2" x 6 pegs. The first measurement represents the spacing between the top hooks and lower support pegs.
You can also simply print these and glue them to any organizer (after cutting off the original organizer's metric pegs). Though these are likely too big for most organizers.
I'll add more ready-to-use versions to this page, with 1, 2, 3 and 4 pegs, and 3" vertical spacing, and 1mm plates (low profile for gluing) when I have time. Until then, you can easily edit these in CAD to reduce the overall size size of the plate or number of pegs.
The photo shows two metric pegboard boxes that I modified. The first one, I printed the original and found the pegs didn't fit my pegboard. I didn't want to throw away the box, so I cut off the metric pegs. Then I created these plates and reduced the 1 x 6 plate to 1 x 3 and made the plate 1mm thin, printed it and glued it to the box. For the second, I added the half the 1 x 6 peg plate to the box in Autodesk Fusion and printed it.
Hopefully you find these useful and they save you some time modifying metric organizers in CAD.