1 / 2
Oof stone beads; parametric — zdjęcie 1
1 / 2

Oof stone beads; parametric

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Beads of the oof stones meme to download with 4, 6, or 8 mm diameter holes. Or, generate another size via Onshape.

Ocena
5 / 5
Polubienia
108
Pobrania
163
Wydruki
1
Wyświetlenia
668
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Much like my fat man atomic bomb beads, this isn't the type of thing I'd usually go out of my way to make, but I've been enjoying this beads contest and felt these were missing. Here are beads of the oof stones meme, available for download with 4, 6, or 8 mm diameter holes. Or, you could generate a different size with the parametric Onshape model. My recommendations for print settings for the 6 mm diameter hole models are:

  • 0.12 mm layer height (or similar)
  • Arachne wall generator
  • Brim on stones b and c at least
  • Seams on the back
  • If you're printing more than one at a time, I'd print by object instead of by layer 

The beads scale with the hole, so smaller diameters could require smaller layer heights or additional brims. I only printed the 6 mm models, but I think these settings will work for all the sizes I pre-made, the note is really just for those venturing smaller. Other settings won't matter much. I insist on arachne because I've found the variable wall thickness to help with adhesion on small parts like these.

I printed mine with 6 mm holes from Polymaker ASA in dark gray because it's the best color I had for stones.

Tagi