Magnetic Purge Buckets for Creality K2 Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various sizes of a Purge Bucket that attaches via magnets to the rear of the Creality K2 Plus 3D Printer:
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 381
- Wydruki
- 1
- Wyświetlenia
- 1929
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A Purge (a.k.a. Poop) Bucket for the Creality K2 Plus 3D Printer that attaches to the rear of the printer.
Current Sizes:
Small - 150 mm Wide x 150 mm Tall x 62 mm Deep
Medium - 150 mm Wide x 150 mm Tall x 87 mm Deep
Large - 150 mm Wide x 250 mm Tall x 62 mm Deep
X-Large - 150 mm Wide x 250 mm Tall x 87 mm Deep
(Additional sizes will be added as they become available)
Designed for (6) 12.0 mm Dia. x 2.7 mm Thk. Neodymium Magnets that are glued into sockets. These magnets can be purchased through Hobby Lobby here or you can modify the provided mesh files for a similar magnet.
Design includes cutouts and a 12 mm standoff for the air inlets and outlets located at the rear of the K2 Plus. Also, part of the surface is textures to provide grip so the you won't drop the bucket and lose your poop.
Can be printed from PLA, but strongly suggest PETG for durability.