1 / 6
XYL Unicorn Tactical Edition Extension Stock Catch Upgrade — zdjęcie 1
1 / 6

XYL Unicorn Tactical Edition Extension Stock Catch Upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adjustable reinforced stock catch upgrade part for the XYL KM900 Unicorn Tactical Edition

Ocena
0 / 5
Polubienia
4
Pobrania
19
Wydruki
0
Wyświetlenia
205
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The XYL Unicorn Tactical Edition Extension Stock Catch Upgrade is an adjustable stock catch upgrade part for the XYL KM900 Unicorn Tactical Edition. Featuring symmetrical lobes reinforced with steel dowel pins, this balances the load-bearing forces across both stock rods, preventing failure from uneven wear (especially from left-handed operators like yours truly). Additionally, the catch increases pre-compression on the catch spring, allowing for more secure engagement with the notches on the adjustable stock rods.

I don't have any tips or documentation on shell modifications and installation, but it should be as simple as trimming one side of the shell to match the other. You could theoretically trim down both sides even more, and it will catch a larger portion of the notches on the stock rods for even more strength. But you should probably start with just trimming the right side to match. Remember: You can always cut more away; adding material back in is much harder.

FEATURES:
• Tactical Unicorn Extension Stock Catch Upgrade
• Steel-reinforced stock adjustment catch
• Symmetrical load-bearing part
• Better engagement than the original part
• Prevents uneven wear and collapse
• Designed for the XYL Unicorn Tactical Edition with some shell cutting
• Partially compatible with the original XYL Unicorn

FILES INCLUDED: 
• 1 Uni-Tac Stock Catch*

*These files are in perpetual beta. Feel free to remix this design yourself if any adjustments are needed.

REQUIRED HARDWARE:
• 2 M3 x 12mm Dowel Pins

RECOMMENDED PRINT SETTINGS:
• Quality: No scarf seams or joints
• Strength: 3-4 wall loops
• Others: Inner brim for better bed adhesion

LINKS:
• XYL Unicorn Tactical Edition

Tagi