3018 CNC mods - endstops etc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to add some end stops and realised the placement of the control board was problematic as well.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought the 3018 to to circuit boards. I needed to add some end stops and when i was mounting these i realised the control board is really in a dumb place for the USB and power cable to be hanging so i created extension mounts. If you aren't going to use a screen print the right hand one, without the screen mount, twice.
i think i just used 4 walls and 10% infill with PLA. hope it helps you.
The screen case and mount was from https://makerworld.com/en/models/912392-makerbase-mks-ts35-r-case#profileId.
I used M3 machine screws and some T nuts in the extrusions