TPU: (reusable) trapped Cable Zip Tie (flex)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
another remix of my reusable cable tie, now for extra holding cables
- Ocena
- 4,444 / 5
- Polubienia
- 229
- Pobrania
- 810
- Wydruki
- 10
- Wyświetlenia
- 4826
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I love the (reusable) cable ties and print them out in different sizes all the time. This is another remix from cable ties. They are flexible, made for using TPU or PP!
Now, on PrusaPrinters 3D Contest “Cable Organizers” I thought I make another remix for holding a cable while trapped to the cable.
It's made for holding cabel scramble in order, without loosing the cable tie when it is used. The first “eyelet” is for first round and first cable (longer term, tied), the second eyelet for the rest to hold the bundle.
But I also made a more massive “stopper” so that on the one hand it really stops (!), on the other hand it can be operated well: it can be opened without bigger problems.
4 lengths: 66, 100, 180 and 250mm.
Of course there are also the “normal” cable ties with same lengths. They are the new Cable ties.
You can print it bigger, then it is surely even easier to use it.
As usual I add the Fusio360 file. Note:
- It is build in bigger size ("for 0.6 nozzle"). To get the files equal to the uploaded resize the stls to 66.67%.
- The length can be easily edited by “Change Parameter” function
update note: I built and tested a lot. The Video and its Pitcures are made with version 22 (but the thumbnail is v28). The finished modell is v28 is even more easy to handle and it's total stable, even when pulling strongly on the loop