JBL Northridge E60 Speaker Grille (Grill)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grille cover to protect the main speaker on the 'JBL Northridge E60' Series.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- GNU General Public License v3.0
I was lucky enough to get a set of JBL E60 speakers, though unfortunately, they didn’t come with the grille covers. The previous owner told me they had gone mouldy and were thrown away—disappointing, as they could have at least kept the frame!
Concerned about accidentally damaging the main speaker, I decided to 3D print a protective cover. This was especially important after I accidentally pushed in the speaker dome whilst moving them. Thankfully, I was able to carefully pull it back out using some tape without causing any damage.
This cover is designed to protect the large speaker and was my first 3D model. I’ve also designed matching pegs and washers, and I may add more covers for the other speakers in the future.
Note: The washer should be placed between the speaker hole and the grille to ensure it sits flush against the speaker. Without it, the bottom won’t sit properly.
A quick tip: Be sure to add supports for the "horns" (as I call them). I chose to print it this way to ensure the grille has a nice texture.
Feel free to modify/improve the design as you like, and I hope you find it useful!