Cable routing for 10 inch (or 19 inch) rack cabinet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple, no support, cable guides that can be mounted on the side profiles of rack rails.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 478
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v3.0
This cable routing clip lets you arrange cables on the sides of a rack cabinet, for instance the very popular Digitus 10" rack cabinets available on Amazon (among other places). Screws into the side angle of the rails, not the front!
Does not block the front of the rack rails, meaning you can remove and replace racks without the cable management being in the way.
Required hardware:
This was designed primarily for Digitus racks, which come with M6 screws. As such, each clip needs:
- 2 standard DIN934 M6 nut
- 2 M6 screws
If the nut is a bit tight to get in, use a screw to pull it in by screwing it in from the other side.
Current variations:
Currently there are two variations. More might be added later on. You can choose which direction you want the angled openings to face, just mirror the parts to get all the available variations.
Single
A single sided cable guide that can be placed to face forwards or backwards.
Double
A double sided cable guide that provides you cable routing both in front of and behind the rack rails. Useful for when you're guiding cables between patch panels or items in the back, but also need to route cables on the front.
The longer end should face forward, in order to clear the rail!
Printing instructions:
Doesn't matter much. Print them as oriented in the provided file. I would suggest using PETG, to avoid long term creep due to heat.