Thunderstring - Crossbow string blaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thunderstring is a small crossbow stringer blaster that shoots half length nerf darts.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 181
- Wydruki
- 4
- Wyświetlenia
- 1002
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thunderstring is a small crossbow stringer blaster that shoots half length nerf darts.
It is designed to fit the smaller 18x18cm build plate printers.
The blaster is held together with 3d printed pins, if they are too loose either use some glue or reprint a scaled version.
Note!
It is important to remove the support in the grip to stock attachment point thoroughly! Otherwise the two parts will not go together.
Additional hardware required!
4mm elastic coord is needed to power the blaster. 3mm would also work or a cut up scrunchie works as well.
I have included .3mf files for the three most popular slicers. These includes support enforcers and are split into two plates one for each color. I would recommend to use these files unless you want to add the supports yourself.