1 / 5
Homematic IP Thermostat Holder (154666A0)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder designed to hold the Homematic IP Thermostat in an 20° angle. Print it in PLA oder PETG and use two M3 screws…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 420
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Holder designed to hold the Homematic IP Thermostat in an 20° angle.
Print it in PLA oder PETG and use two M3 screws to attach it to the backplate. No supports needed.
Print Settings
Printer Brand:
Creality
Printer:
CR-X
No
Supports:
No
200
Infill:
38
Filament:
PolyMaker PLA
Category: Household