Hive thermostat wall mount plate for UK single-gang sockets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This plate attaches to the backbox of a standard single-gang UK plug socket so a Hive wall plate can easily be mounted
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Solving a Common Issue with Hive Thermostat Installation
When replacing an existing thermostat with a Hive model, you might encounter a problem if the Hive wall plate is slightly too small for the standard UK single-gang back box. This can prevent it from fitting properly, even if you're using the original screw holes.
The Solution
This model addresses that issue by providing a larger mounting surface that covers the outer edge of the back box. This allows you to securely attach the Hive wall plate using the original screws, ensuring a neat and efficient installation.
(Tested with wall plate supplied with Hive Active Heating Thermostat model SLT3D)
Print settings
I printed the parts as follows:
- Material = PLA
- Layer height = 0.2mm
- Supports not required
- 20% infill
Additional parts
- M3.5 Machine Screws - length to suit your back box