12 gram CO2, Spring Latch, PIP Hinge Bottle Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These CO2 bottle boxes are printed as separate parts that are printed in orientations chosen to maximize strength.
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
Look in https://www.printables.com/@brass_ring/collections/2252273 for other sizes.
12-gram cartridge:
- Diameter: Approximately 22 mm (0.87 inches)
- Length: Approximately 86 mm (3.39 inches)
These CO2 bottle boxes are printed as separate parts that are printed in orientations chosen to maximize strength and then snapped together.
The box halves require moderate infill (10%-20%) and can be printed with no supports, but I prefer to paint on supports under the flat sections on the hinge hoops, the latch brackets, and the latch catch. I printed with 0.16 layer height in PETG and PLA.
Assembly instructions: See the attached PDFs.
Category: Tool Holders & Boxes