Lapierre Xelius roadbike spacer cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lapierre Xelius SL7.0 2024 road bike - spacer cover for standard stem use
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My Lapierre Xelius SL7.0 2024 road bike came equipped with a proprietary stem. Other stem length were not available. For bike fitting, I wanted to mount a standard stem with a different length.
Problem: the proprietary stem has the brake lines mounted inside. To get them out of the headset, I designed a cover for the spacer stack with a taper to the standard stem and also some holes for the break lines.
Prototypes were printed in yellow PLA. Final part was printed in PA12 nylon for strength. I used a HP multijet fusion printer at JLC3DP. Part price was US$3.
In the photo section, you can see three variants. Original stem, prototypes and final printed part.