1 / 4
Neptune 4 Filament sensor enclosure with UBBI mount — zdjęcie 1
1 / 4

Neptune 4 Filament sensor enclosure with UBBI mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Compact filament sensor enclosures and mounts.

Ocena
0 / 5
Polubienia
5
Pobrania
39
Wydruki
0
Wyświetlenia
240
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The optical filament sensor is good, but it cannot detect transparent filament (as described).
When printing with transparent filament, need to use the stock sensor, so I mounted it like this.

I know there is already has a nice mount for the stock sensor.
But you know, compact and light is always good.

It feels like there is less resistance than the stock sensor.

Other changes
- Filament route of the sensor enclosure is now lined with a PTFE tube.
- Connector pins on the sensor I had were long, so I made a hole in the lid to make it fit.