UGreen CM806 USB 3.2 Hub under desk holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A solid 2 piece under desk/table holder for this USB Hub.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an under desk/table mount for the Ugreen CM806 USB 3.2 hub from Amazon.
Designed so that when the backing plate is installed and screwed down there is no play when inserting removing USB drives etc. Though this will depend on print accuracy of course (Printed on Bambu Lab A1)
It requires 6 x M3 countersunk bolts, either 6 or 8mm in length to secure the backing plate.
2 x M3 screws required to fix the mount to the bottom of the desk.
You can also double side tape the mount under the desk for added security.
A USB C extension cable to connect to your PC is likely a requirement too as the hubs lead is rather short.
Print without supports as per orientation in photo #4