1 / 4
Single Extruder - Dual Color - Eggs (fusion360) — zdjęcie 1
1 / 4

Single Extruder - Dual Color - Eggs (fusion360)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An egg model modified with the dual color technique (twice). Each model prints in two part that slide into each other.

Ocena
0 / 5
Polubienia
10
Pobrania
49
Wydruki
0
Wyświetlenia
160
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution

The fusion360 file is provided would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example.

 

Printing information:

  • Scaling down can be tricky since the tolerances will scale accordingly aswell, I recommend tweaking the tolerances in fusion first then to scale it as you wish.
  • Split the model to its parts before printing them separately then, when done, they should simply slide into each other
  • Use regular supports to support the bottom model

---

Erratum (06/04/25): Addition of a striped version of the model

Tagi