MMU3 Core ONE UltiMulti Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified UltiMulti legs to screw to the rear frame of the Core ONE.
- Ocena
- 4,5 / 5
- Polubienia
- 37
- Pobrania
- 135
- Wydruki
- 2
- Wyświetlenia
- 1961
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I am sharing my modified legs for the MMU3 UltiMulti mod that allowed me to attach them to the Core ONE. There are two holes in the upper frame piece that are the exact perfect width for the MMU3. Just need a M3Ns nut and two small'ish M3 screws.
NOTE: this works for the UltiMulti modded MMU3. If you are looking for simple legs for the original Prusa modeled MMU3 parts, please see this simple excellent design here from @Rolf_991381
https://www.printables.com/model/1281236-ikea-uppatvind-core-one-hepa-filter-landscape
Just remove the left and right legs of your UltiMulti and replace with these. I've angled it so the MMU3 is pointing at a 45 degree angle which is better (for my setup at least) for PTFE tube angle.
I'd consider myself more of a MacGyver than a professional… I whipped these together and they work for my needs right now.
See my forum posts of my experience in getting this to work. Need a longer PTFE tube for the extruder and need to modify the length. The buffer will need some work too with the longer length.
Here is a video of it in action
https://imgur.com/mmu3-with-core-one-1d3iwCK