Mellow Fly Gemini DIN rail mount (E3NG rail spacing)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mellow Fly Gemini mount for DIN rails.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a plate to mount the Mellow Fly Gemini (tested with v1/1.2 but could probably work with the others) mcu/sbc combo motherboard to the DIN rails on the electronic backpack of the E3NG. Could also works with other projects, i guess.
Works with 3 (2 down 1 up) electronics_DIN_rail_generic_mount.stl.
Use 2 m3x6 screws with each.
Then 4 m3 heat set inserts in each corners to attach the board.
The easiest way to install on the rails would be to first put the generic_mounts onto the rails, then screw the board mount in and lastly the motherboard.
I used the model from FCUK to get the motherboard's screwholes then had to do a lot of trial and errors to get the rest to fit in the rail config on the E3NG.
The measurements are not totally perfect, tell me if you need anything else.