Forney AC/DC 314 Arc Welder Adjustment Handle (Crank)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement crank adjustment handle for the Forney AC/DC Arc Welder, part number 00314
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a replacement for the crank adjustment handle that the Forney AC/DC Arc Welder 314 uses. You will need an M3 x12 screw to act as a set screw to old the handle on to the adjustment bolt. and a #8 x 1 ¼ bolt with a #8 - 32 nut and a #8 washer or some equivalent in metric. The screws are a little tight but I got them to work just fine.
Printed in PETG with 4 walls and 50% infill.
It won't live outside in the weather but needed some extra durability because of its purpose. Turning it does not take any extra force at all and it works well, should last the lifetime of the welder.