Roblox style Avatar flexible links
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on Blox Fruits character with a hat. Mix and match parts.
- Ocena
- 4,5 / 5
- Polubienia
- 22
- Pobrania
- 178
- Wydruki
- 2
- Wyświetlenia
- 1542
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on Blox Fruits character with a hat. Mix and match parts to get the character look - can be super long or tiny short!! I'll also look at adding some clothing accessories when I get time.
The parts snap together with a ball joint I designed so have some flexibility as well as rotation. I've only printed in PLA where the balls have a tendency to snap off when you pull them apart - just pull out the left over ball and print a new part or try PETG.
Supports - only for the hat piece and the piece with the side-facing ball. If you allow bridging and switch supports to base plate only, then it shouldn't generate supports for all the other pieces.
Infill - I printed at 15% with the tiny gap fill setting at 5mm to fill the ball joint stems.
There's a 3mf file with all the parts on 3 plates - you'll need to print 2 of the plates twice for the arms and legs.
update 30May2025 - added brown charmer hair, pale scarf