Buck Converter Mounting Base (61x31 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was made to mount and raise the LM2596 step-down converter. Originally designed to be used with Voron 0.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 259
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello guys.
I have designed the mounting base for the LM2596 DC-DC Buck Converter with a display. It was originally designed to fit within the back compartment of Voron 0 but it can be adapted to anything that suits your needs.
The model is pretty simple to print without any support.
Compatibility: LM2596 DC-DC Buck Converter w/ display (screw hole dimension 31x61 mm)
Material: any materials of your choice
Setting: Voron setting would be fine but anything lower than that also works great.
Additional components: 4x heat insert (3x4x5 mm), 4x M3x6 (or 8) mm screw