Motorcycle winglet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here, a second and admittedly a much better attempt at winglets.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 342
- Wydruki
- 0
- Wyświetlenia
- 2129
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Here, a second and admittedly a much better attempt at winglets, the crossectional profile of the blades is designed with reference to downforce-generating aerofoil profiles. So they should get you some "downforce".
The winglets pictured are printed in ABS painted black and adhered with 3M VHB tape, do note some sanding and prep will have to be done in to help it stick well if you print the winglets without orienting them.
Please comment with any suggestions, I made it free just so I can get some input, thanks everyone.
- Models are pre-orientated, however, you can orient as you wish
- Print with supports only on the base
- 0.2 layer height, 2-3 walls recommended, 4 top and bottom layers
- Suggested use of high-temperature resistant material such as ABS or PETG.
- Feel free to scale to as big as you bed can fit.