Neptune 4 Pro Y Tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A better tensioner for the Y axis of the Neptune 4, allow to mount toothled idler
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 203
- Wydruki
- 1
- Wyświetlenia
- 615
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Neptune 4 Pro improved Y tensioner
Want a better backup for your tensioner in case it breaks?
Too tired of belt rubbing on the ends of extrusions?
Still not tense enough at the end of the movement range?
Or just simply needing an upgrade
This tensioner does it all, being carefully designed to shove as much material into the part, enhancing strenth, it aligns better with the rails on the stock cover, have more tension range, and it uses a proper toothed idler!
Inspired by the work of @SilencedFros_2044064 and other remix, there is no model of the Y tensioner for the N4 Pro so i made one.
Features:
- Reduces belt rubbing
- Remove potential print artifacts
- Automatically align better
- More adjustment range
- Built sturdier than stock
- Gates have better bearings allowing for higher tensions and lifespan
Recommended print settings:
- Walls/perimeters: atleast 2.4mm
- Tolerance requirement: 0.2mm
- Print orientation: as imported (upside down)
- Supports: none
Recommended materials:
- PETG
- ABS/ASA
- Any low-creep plastic
BOM
| Name | Qty |
|---|---|
| M3 * 25mm BHCS | 1 |
| 5mm * 20mm SS Dowel pins | 1 |
| (Option 2) Gates spec idler | 1 |
For the mounting instruction check the original post of @SilencedFros_2044064
(If u enjoy my design u can like, follow and tip me)